microneedle vaccine patch  on a finger
The scientists used a 3D printer to produce microneedle vaccine patch that dissolves into the skin to boost immunity.
Source: University of North Carolina at Chapel Hill

3D printed patch offers vaccination without a shot

Stanford University and the University of North Carolina Chapel Hill reseachers have created a 3D printed microneedle vaccine patch that delivers stronger immune response than a vaccine shot.

The trick is applying the vaccine patch directly to the skin, which is full of immune cells that vaccines target. The resulting immune response from the vaccine patch was 10 times greater than vaccine delivered into an arm muscle with a needle jab, according to a study conducted in animals.

Considered a breakthrough are the 3D printed microneedles lined up on a polymer patch and barely long enough to reach the skin to deliver vaccine.

“In developing this technology, we hope to set the foundation for even more rapid global development of vaccines, at lower doses, in a pain- and anxiety-free manner,” said lead study author Joseph M. DeSimone, professor of translational medicine and chemical engineering at Stanford University and professor emeritus at UNC-Chapel Hill.

The ease and effectiveness of a vaccine patch sets the course for a new way to deliver vaccines that’s painless, less invasive than a shot, does not require cold storage and can be self-administered.

Study results show the vaccine patch generated a significant T-cell and antigen-specific antibody response that was 50 times greater than a subcutaneous injection delivered under the skin. That heightened immune response could lead to dose sparing, with a microneedle vaccine patch using a smaller dose to generate a similar immune response as a vaccine delivered with a needle and syringe.

While microneedle patches have been studied for decades, the work by Carolina and Stanford overcomes some past challenges: through 3D printing, the microneedles can be easily customized to develop various vaccine patches for flu, measles, hepatitis or COVID-19 vaccines.

Recommended article

Advantages of the vaccine patch

The COVID-19 pandemic has been a stark reminder of the difference made with timely vaccination. But getting a vaccine typically requires a visit to a clinic or hospital. There a health care provider obtains a vaccine from a refrigerator or freezer, fills a syringe with the liquid vaccine formulation and injects it into the arm. Although this process seems simple, there are issues that can hinder mass vaccination – from cold storage of vaccines to needing trained professionals who can give the shots.

Meanwhile vaccine patches, which incorporate vaccine-coated microneedles that dissolve into the skin, could be shipped anywhere in the world without special handling and people can apply the patch themselves. Moreover, the ease of using a vaccine patch may lead to higher vaccination rates.

Recommended article

How the microneedles are made

It’s generally a challenge to adapt microneedles to different vaccine types, said lead study author Shaomin Tian, researcher in the Department of Microbiology and Immunology in the UNC School of Medicine. “These issues, coupled with manufacturing challenges, have arguably held back the field of microneedles for vaccine delivery,” she said.

Most microneedles are fabricated with master templates to make molds. However, the molding of microneedles is not very versatile, and drawbacks include reduced needle sharpness during replication. “Our approach allows us to directly 3D print the microneedles which gives us lots of design latitude for making the best microneedles from a performance and cost point-of-view,” Tian said.

The microneedles were produced at the University of North Carolina at Chapel Hill using a CLIP prototype 3D printer that DeSimone invented and is produced by CARBON, a Silicon-Valley company he co-founded.

The team of microbiologists and chemical engineers are continuing to innovate by formulating RNA vaccines, like the Pfizer and Moderna COVID-19 vaccines, into microneedle patches for future testing. “One of the biggest lessons we’ve learned during the pandemic is that innovation in science and technology can make or break a global response,” DeSimone said. “Thankfully we have biotech and health care workers pushing the envelope for us all.”

The rearh was published in the Proceedings of the National Academy of Sciences (PNAS).

Related articles

Self-powered wearable devices

Self-powered wearable devices

Scientists have created a 3D printing method that integrates functional and structural materials to print wearable.

3D printed werables never need to charge

3D printed werables never need to charge

Engineers have developed a new type of wearable device that is 3D printed to custom fit the wearer.

Microneedles: Nano-sized, huge impact

Microneedles: Nano-sized, huge impact

By downscaling the needles tool to micrometer-size, researchers open even more areas of application for them, while bypassing some of the most important issues.

3D printed sensor invented for wearables

3D printed sensor invented for wearables

Researchers have utilized 3D printing and nanotechnology to create a durable, flexible sensor for wearable devices to monitor everything from vital signs to athletic performance.

Voxel-based technique to streamline bioprinting

Voxel-based technique to streamline bioprinting

Researchers have developed a new bioprinting technique based on voxels.

3D printing and AI improve cochlear implants

3D printing and AI improve cochlear implants

3D printing and machine learning unite in new research to improve cochlear implants for users.

3D printing enables tissue with customized shape

3D printing enables tissue with customized shape

3D-printed chambers with personalized shapes will be used to grow transplantable tissue that can take the shape of a wound to be closed.

3D printing nanoresonators

3D printing nanoresonators

Researchers illustrated an innovative approach to developing miniaturized and multifunctional sensors.

3D printed copper components for linear accelerators

3D printed copper components for linear accelerators

For the first time, researchers have 3D printed essential quadrupole components for linear accelerators from pure copper.

Popular articles

Subscribe to Newsletter