Dental prostheses like these are currently produced by hand in a laborious...
Dental prostheses like these are currently produced by hand in a laborious process. “ATeM” wants to make the production of prostheses faster as well as more comfortable and efficient in terms of costs and resources.
Source: Fraunhofer Institute for Material and Beam Technology IWS

Medical technologies that come out of the printer

Fraunhofer-Gesellschaft's German-Polish High-Performance Center brings additive manufacturing to medical technology – first demonstrators will already be presented by the end of 2021.

It's all about high-tech dentures, prostheses that autonomously detect inflammatory reactions in the body, or individually adapted seats for wheelchairs. A German-Polish Fraunhofer-Gesellschaft High-Performance Center is researching new technologies for the use of 3D printing processes in medical technology. The Fraunhofer Institute for Material and Beam Technology IWS in Dresden and the Fraunhofer Institute for Machine Tools and Forming Technology IWU in Chemnitz are involved in the ”Additive Technologies for Medicine and Health” (ATeM) Center on the German side. They cooperate with the Faculty of Mechanical Engineering and the Center for Advanced Manufacturing Technologies (CAMT) at Wroclaw University of Science and Technology.

Additive technologies offer interesting opportunities, particularly for manufacturers in the medical technology sector. 3D printing allows individual solutions tailored to the patient as well as the integration of new, improved properties and functionalities into components. This is usually not only more cost-effective than conventional processes but also allows to provide novel therapies and treatment approaches. The ATeM High-Performance Center, founded in 2021, aims at turning additive manufacturing into an established standard tool in medical technology in the years to come. At the end of this year, the project partners are planning to present their first demonstrators.

The scientists are currently investigating new application areas in several individual projects. One project is focusing on the prospects for 3D printing in dentistry. ”There is great potential in the use of innovative materials and the integration of additional functionalities in dental prostheses to increase the wearing comfort for the patient,” explains Prof. Dr. Frank Brückner, Technology Field Manager Additive Manufacturing and Printing at Fraunhofer IWS. Additive manufacturing might allow significantly more complex implants to be printed immediately after a 3D scan of the oral cavity, thus reducing waiting times. Additive processes could also be used, for example, to combine metal and plastic materials for improved aesthetics.

In the future, lab-on-chip systems shall replace animal testing and enable the...
In the future, lab-on-chip systems shall replace animal testing and enable the patient-specific use of pharmaceuticals.
Source: Fraunhofer Institute for Material and Beam Technology IWS

Smart hip joints

Another application scenario focuses on functional enhancements, such as the direct integration of sensors into medical components. Sensitive sensors in additively manufactured knee or hip joints could detect inflammatory reactions after surgery by reacting to higher temperatures or altered biomarkers. In future, lab-on-a-chip systems will also be printed, enabling the simulation of organ functions and processes in the human body to be displayed on a chip. Thus, it might become possible to investigate pharmaceuticals without the need for animal tests.

In two projects led by Fraunhofer IWU, scientists are currently investigating how fiber-reinforced 3D structures can be printed. ”We can achieve a product design suitable for loads, yet also being very light-weight, by using reinforced fibers that we introduce directly into the plastic matrix,” explains Prof. Dr. Lothar Kroll, Scientific Director Lightweight and Textile Technologies at Fraunhofer IWU. For example, this could be used to print cranial implants using the biocompatible thermoplastic polyetheretherketone (PEEK). The researchers are also currently working on individually adapted seats for wheelchairs and high-strength orthoses.

Piezo sensors embedded in orthopedic inlays shall help analyzing the body...
Piezo sensors embedded in orthopedic inlays shall help analyzing the body balance and thus preventing posture problems.
Source: Fraunhofer Institute for Material and Beam Technology IWS

Patients will soon benefit

A Fraunhofer Project Center managed by Fraunhofer IWS and the CAMT of TU Wroclaw has been established in 2008. ”We are pleased that with the new High-Performance Center we can now further expand the synergy effects of this successful collaboration,” says Prof. Dr. Edward Chlebus, former Dean of the Faculty of Mechanical Engineering at TU Wroclaw. 

”All partners are experts in the field of additive manufacturing,” emphasizes Robin Willner, scientist at Fraunhofer IWS and office manager of the German-Polish High-Performance Center. He adds that TU Wroclaw has very close ties to the medical faculty there. ”Together, we now gain an excellent insight into where needs exist, where solutions have not yet been found and where additive technologies could create added value in medical and healthcare sectors.”

As early as the end of the third quarter of 2021, the project participants plan to present the first demonstrators for the individual projects. This rapid implementation is possible because the partner institutions have already created essential basics for the current research in preliminary studies over the past. The ideas for new medical products and therapies are expected to benefit patients in the near future through industrial collaborations and possible spin-offs.

Subscribe to our newsletter

Related articles

A 3D printed multifunctional pressure sensor

A 3D printed multifunctional pressure sensor

The 3D printed pressure sensor embedded with a temperature sensor is low-cost and scalable to large-scale production of smart robotic systems.

3D printed knee implant for arthritis sufferers

3D printed knee implant for arthritis sufferers

A groundbreaking new treatment that uses 3D printed implants and that could bring relief to tens of thousands of knee osteoarthritis sufferers has received approval to be trialled in UK patients.

Controlling the performance of 3D printed implants

Controlling the performance of 3D printed implants

In order to quickly customize implants with complex structures, scientists use 3D printing technology to prepare Ti-Mo alloy implants, and then adjust the microstructure and performance through subsequent heat treatment.

Reverse 3D printing to make tiny implants

Reverse 3D printing to make tiny implants

Researchers have developed a 3D printing technique that allows them to create incredibly small and complex biomedical implants.

Microneedles: Nano-sized, huge impact

Microneedles: Nano-sized, huge impact

By downscaling needles tool to micrometer-size, researchers open even more areas of application for them, while bypassing some of the most important issues.

3D printing strong and tough hydrogels

3D printing strong and tough hydrogels

Skin and cartilage are both strong and flexible – properties that are hard to replicate in artificial materials. But a new fabrication process brings lifelike synthetic polymers a step closer.

3D printing biomedical parts with supersonic speed

3D printing biomedical parts with supersonic speed

Researchers have developed a 3D printing technique that creates cellular metallic materials by smashing together powder particles at supersonic speed.

Aerogel: the micro structural material of the future

Aerogel: the micro structural material of the future

In a research-first, scientists from Empa were able to 3D print stable well-shaped microstructures made from silica aerogels for use in biotechnology and precision engineering.

3D printed implants for treatment of bone defects

3D printed implants for treatment of bone defects

BellaSeno GmbH will design and manufacture personalized, 3D-printed, absorbable implants suitable for the treatment of diabetes patients with bone defects.

Popular articles

Subscribe to Newsletter