This new device could replace existing auditory brainstem implants.
This new device could replace existing auditory brainstem implants, which have a number of shortcomings.
Source: École Polytechnique Fédérale de Lausanne
23.10.2019 •

Next-generation soft hearing implants

Researchers have developed a conformable electrode implant that will allow people with a dysfunctional inner ear to hear again. This new technology would improve existing auditory brainstem implants, which have a number of shortcomings.

Close to half a million people around the world suffer from a serious hearing impairment. In some cases, they can find relief with hearing aids, cochlear and other types of implants. Yet these devices do not help people whose inner ear is damaged or whose cochlear nerve does not function properly. For these patients to recover their sense of hearing, electrical signals must be sent directly to the auditory brainstem. The neuroprosthetic used for this purpose is called an auditory brainstem implant, or ABI. Yet the outcomes of ABIs are modest with most patients recovering only sound awareness. What’s more, clinical ABIs are stiff and cannot conform precisely to the curvature of the auditory brainstem.

To address this problem, Stéphanie Lacour’s team at EPFL’s Laboratory for Soft BioElectronic Interface (LSBI) worked with researchers from Mass. Eye and Ear and Harvard Medical School to develop a soft electronic interface. The highly elastic implant conforms precisely to the curved surface of the auditory brainstem and can therefore send highly targeted electrical signals. It has been tested successfully on mice – the implant has a surface area only 0.25 mm2 – and has now been produced at a size suitable for human use and in a form that is compatible with current surgical techniques. It will undergo further study in preparation for human trials.

Next-generation soft hearing implants

Inspired by Japanese cutouts

The new implant consists of a conformable array of platinum electrodes encased in silicone. “We focused on platinum because it’s already used widely in clinical settings,” says Nicolas Vachicouras, a post-doc at EPFL’s School of Engineering and the article’s lead author.

Unfortunately, platinum is a rigid metal that cannot be distorted without being damaged. The researchers overcame this hurdle by applying the traditional Japanese paper-cutting technique called kirigami, etching a Y-shaped pattern into metalized plastic segments. Then they machined the metal at the micron scale (one micron = one thousandth of a millimeter), using techniques commonly found in the microfabrication of integrated circuits. The result is a very compliant and highly conductive electrode implant.

Photo

The EPFL researchers are already eyeing other applications. “The properties of our device would be of value for all sorts of implantable neuroprosthetics,” says Stéphanie Lacour, “such as those used to stimulate or record neural activity in the spine, brain or even peripheral nerves.”

The EPFL researchers worked closely with Dr. Lee’s team at Mass. Eye and Ear. Dr. Lee said, “This collaborative study between researchers in Boston and Geneva represents an important step towards improving the performance of the auditory brainstem implant (ABI), a specialized device that is used for patients who are deaf and are not cochlear implant (CI) candidates. Overall, ABI users have modest outcomes compared to CI users. We believe that the translation of our novel “soft” auditory brainstem implant technology that addresses the biomechanical mismatch between existing stiff implants and the curved surface of the brain will improve performance and reduce side effects.”

Subscribe to our newsletter

Related articles

Integrate micro chips for electronic skin

Integrate micro chips for electronic skin

First fully integrated flexible electronics made of magnetic sensors and organic circuits opens the path towards the development of electronic skin.

Bioelectronic implant could prevent opioid deaths

Bioelectronic implant could prevent opioid deaths

Researchers are developing a device that can sense the effects of a potentially fatal level of ingested opioids and deliver a life-saving dose of naloxone.

Implants enable man to control prosthetics with ‘thoughts’

Implants enable man to control prosthetics with ‘thoughts’

Researchers have implanted electrodes in brain of a person who is mostly paralyzed to enable him to have some “mind control” of motorized prosthetic arms.

Implants: reconfigurable electronics promise innovations

Implants: reconfigurable electronics promise innovations

Medical implants of the future may feature reconfigurable electronic platforms that can morph in shape and size dynamically.

Wireless system can power devices inside the body

Wireless system can power devices inside the body

Researchers have developed a new way to power and communicate with devices implanted deep within the human body.

3D printed implants seed multiple layers of tissue

3D printed implants seed multiple layers of tissue

Researchers are 3D printing "groovy" tissue-engineering scaffolds with living cells to help heal injuries.

Hybrid microscope could bring digital biopsy to the clinic

Hybrid microscope could bring digital biopsy to the clinic

By adding infrared capability to the ubiquitous, standard optical microscope, researchers hope to bring cancer diagnosis into the digital era.

Operating with precision

Operating with precision

Researchers at the University of Stuttgart have developed a miniature laboratory the size of the tip of a needle.

4D printed tiny needles that could replace hypodermic needles

4D printed tiny needles that could replace hypodermic needles

Rutgers University have devised a way to integrate microneedles with backward facing barbs, so that microneedle arrays can stay in place as long as needed.

Popular articles