Tommaso Melodia, William Lincoln Smith Chair Professor in the Department of...
Tommaso Melodia, William Lincoln Smith Chair Professor in the Department of Electrical and Computer Engineering, conducts research on a 3D-printed phantom of the human kidney in the Interdisciplinary Science and Engineering Complex.
Source: Ruby Wallau/Northeastern University

Sound waves could bring us smarter medical implants

A scientist is working to develop miniature implantable medical devices that sense and communicate wirelessly via sound waves.

Pinned to a wall in Tommaso Melodia’s office, next to a stack of wireless technology guidebooks, is a child’s illustration: a smiling heart symbol alongside the word “Papa.” His office is covered with drawings like these, drawings suggesting that this Northeastern engineering professor and father of four has touched the hearts of his children. And someday—through next-generation pacemakers that emit sound waves to regulate cardiac rhythms—he may touch the hearts of many more.

Melodia is working to develop miniature implantable medical devices that sense and communicate wirelessly via sound waves. As the director of Northeastern’s Institute for the Wireless Internet of Things and the founder of the spinoff company Bionet Sonar, he believes this technology could one day treat a broad range of ailments, including diabetes, epilepsy, Parkinson’s disease, and heart conditions.

Traditional pacemakers and other wireless medical devices currently on the market rely on electromagnetic radio waves to communicate. When these waves travel through water, they’re primarily absorbed into it, which means they can’t travel through it freely. (That’s a big deal, if we pause to consider that water makes up 60 to 70 percent of the human body!) As a result, when two portions of a pacemaker need to communicate with each other, they must transmit signals via special wires called leads, which can become infected or break. This energy inefficiency also means that patients must periodically undergo additional surgeries for battery replacements.

A 3D-printed phantom of the human kidney seen in professor Tommaso Melodia’s...
A 3D-printed phantom of the human kidney seen in professor Tommaso Melodia’s lab the Interdisciplinary Science and Engineering Complex.
Source: Ruby Wallau/Northeastern University

For years, Melodia wondered if sound waves—which easily propagate through water and human tissues—were the solution to these problems. In 2012, a grant from the National Science Foundation gave him the opportunity to put this idea into action. “We’re using ultrasonic waves—frequencies that cannot be heard—to carry information between different implantable medical devices,” says Melodia, who is William Lincoln Smith Chair Professor in the Department of Electrical and Computer Engineering.

He and his research group hope to begin testing their ultrasonic pacemaker in animal models by the end of the year. The pacemaker would be comprised of multiple implants, each smaller than a dime, that would nestle within the different chambers of the heart and maintain its rhythm through synchronized, invisibly pulsing ribbons of sound. No leads required—and a tiny battery, rechargeable by sound waves from the outside world, would sit under the skin.

Ultrasonic-pacemaker patients would also be less vulnerable to hackers—a surprisingly valid concern, at least for public figures. In 2013, for example, doctors disabled the wireless capabilities of former Vice President Dick Cheney’s pacemaker out of fear that terrorists might hack into him. In contrast, says Melodia, with ultrasonic implantable devices, “[hackers] have to at least touch the person—and chances are you’d notice if someone was touching you—so it’s an additional layer of security.”

Student Raffaele Guidainfini uses an oscilloscopes to conduct research for...
Student Raffaele Guidainfini uses an oscilloscopes to conduct research for professor Tommaso Melodia in the Interdisciplinary Science and Engineering Complex.
Source: Ruby Wallau/Northeastern University

Meanwhile, diabetics could someday benefit from a similar system, a wirelessly controlled “artificial pancreas” entirely within the body. An implanted glucose-measuring sensor would continuously send signals to another device: an internal pump that would, in turn, deliver the exact dose of insulin to keep the patient safe.

People with certain neurological conditions could use this technology as well. For instance, Melodia is working to develop a tiny, artificially intelligent chip embedded within brain tissue that could predict incoming seizures and send signals to alert a second device. That second device could then counteract the seizure with carefully calibrated neurostimulation. And Melodia has formed a partnership with a neurosurgeon at the University of Louisville to investigate the possibility of creating lead-less, battery-less deep brain stimulation to treat tremors in people with Parkinson’s disease. “I have no doubt that we’ll do something in that space,” he says.

“If this technology became the basis of miniaturized implantable devices that don’t exist today, it could help save lives,” Melodia adds. He acknowledges that the technology is still being tested in models that mimic human tissues—and while they’ll soon try the implants in animals, testing in humans is likely a long way off. “But we have beautiful prototypes that work great. … The potential is huge.”

Subscribe to our newsletter

Related articles

3D printed implants seed multiple layers of tissue

3D printed implants seed multiple layers of tissue

Researchers are 3D printing "groovy" tissue-engineering scaffolds with living cells to help heal injuries.

Groundwork for patient-specific 3D printed meniscus

Groundwork for patient-specific 3D printed meniscus

Researchers have developed a novel methodology to provide non-invasive analysis of meniscal implants.

Grow a better jawbone in your ribs

Grow a better jawbone in your ribs

Engineers have developed a technique to grow live bone to repair craniofacial injuries by attaching a 3D-printed bioreactor.

Superior bio-ink for 3D printing pioneered

Superior bio-ink for 3D printing pioneered

Engineers have developed a “bio-ink” for 3D printed materials that could serve as scaffolds for growing human tissues to repair or replace damaged ones in the body.

Portable 3D skin printer for wound healing

Portable 3D skin printer for wound healing

A new handheld 3D printer can deposit sheets of skin to cover large burn wounds – and its “bio ink” can accelerate the healing process.

4D printed tiny needles that could replace hypodermic needles

4D printed tiny needles that could replace hypodermic needles

Rutgers University have devised a way to integrate microneedles with backward facing barbs, so that microneedle arrays can stay in place as long as needed.

Artificial pericardial tissue from the 3D printer

Artificial pericardial tissue from the 3D printer

In the PolyKARD project, biomimetic polymers are being developed that can imitate the mechanical properties of pericardial tissue.

Step foward for 3D printing a bioprosthetic ovary

Step foward for 3D printing a bioprosthetic ovary

Ongoing development of an "ink" will be used for 3D printing an artificial (or bio-prosthetic) ovary that could be implanted and allow a woman to have a child.

Novel bioprinter shows potential to speed tissue engineering

Novel bioprinter shows potential to speed tissue engineering

Researchers have found a way to speed up tissue engineering for potential organ regeneration or replacement using a novel bioprinter.

Popular articles