Using soft fabric sensors, individual STAT elements integrated into arrays...
Using soft fabric sensors, individual STAT elements integrated into arrays maintain their pressure profiles independently of the other elements in the array.
Source: Wyss Institute at Harvard University

Robotic textiles could enable new mechanotherapy

A new smart fabric that can be inflated and deflated by temperature-dependent liquid-vapor phase changes could enable a new range of medical therapeutics and industrial applications.

Soft robots are on the rise largely because of their ability to interact with and conform to the human body in ways that stiff and rigid robots cannot. As wearable devices that often use specially engineered fabrics, soft robots are starting to become the basis for new rehabilitation therapies, or as enhancements that protect wearers while they perform strenuous tasks. Meanwhile, as non-wearable but independently functioning devices, textile-based soft robots could enable new mechanotherapies to help tissues such as muscles and their activating nerve fibers repair damage, or prevent damage to them in the first place by applying physical forces at the right frequency in precise locations.

Besides specialized fabrics, textile-based soft robots need “actuating” and “sensing” systems that, respectively, induce their motions and allow them to literally feel their own state and the environments they interact with. So far, the majority of textile-based soft robots are pneumatically actuated, which means that they are tethered via bulky tubing to external, often noisy compressors that modulate air-pressure within them so they can change their structures and motions.

Now, a highly multidisciplinary team of researchers from Harvard University’s Wyss Institute for Biologically Inspired Engineering, John A. Paulson School of Engineering and Applied Sciences (SEAS), and Department of Chemistry and Chemical Biology has developed Smart Thermally Actuating Textiles (STATs) that induce pressure changes by electrically controlling liquid-vapor phase changes in robotic textiles, eliminating the need for pneumatic tethers and opening up new textile robotic applications.

The team was led by Wyss Institute Associate Faculty member Conor Walsh, Ph.D.. Walsh and his group, with their fundamental work, have developed a number of soft, textile-based wearable robots for biomedical and other applications. “Our aim was to engineer robotic fabrics that can electronically sense and actuate, use integrated closed-loop feedback control to regulate themselves, and be manufactured in arbitrary shapes and large batches,” said co-first author Vanessa Sanchez, a graduate student working in Walsh’s group at the Wyss Institute and SEAS who joined the team with a background in engineering and fashion design. “STATs embody all of these features. As lightweight and unobtrusive smart fabrics, we believe they could enable a new range of robotic approaches.”

To develop their textile-embedded actuation mechanism, Walsh’s team collaborated with Wyss Associate Faculty members Robert Wood, Ph.D., and George Whitesides, Ph.D. Wood and his group brought their broad expertise on non-wearable soft robots and innovative manufacturing techniques to the project, while Whitesides’ group had created a deep understanding of fluidic systems, adaptive materials, and their self-regulating properties that, together, became key to the development of STATs.

Soft capacitive fabric pressure sensors are fabricated in batches using proven...
Soft capacitive fabric pressure sensors are fabricated in batches using proven laser patterning and thermal bonding techniques. This scalable manufacturing method enables automated fabrication of customizable, pre-aligned pressure sensor arrays for STAT devices.
Source: Wyss Institute at Harvard University

The researchers manufactured STATs as tightly sealed pouches using a commercially available woven textile membrane coated with a layer of heat-sealable thermoplastic polyurethane and incorporating embedded electrically active components. By dynamically powering STATs’ electric components, an enclosed engineered fluid known as NovecTM 7000 is vaporized by heat and expands its volume up to 100-fold, allowing the robotic textiles to increase and decrease their internal pressure over a significant range.

“To be able to actuate these pressure changes in a programmable fashion and allow the system to regulate itself, we manufactured electronically-conductive silver-plated threads into the fabric that form the textile-based heater and sensor elements and enable the desired temperature and pressure control inside the pouches,” said co-first author Christopher Payne, a research associate working closely with Sanchez on Walsh’s team. “With an integrated ‘closed-loop feedback’ controller, STATs autonomously maintained their pressure even when placed into environments in which the exterior temperature fluctuates, like close to an air tube that actively cools the system.”

Photo
Source: Wyss Institute at Harvard University

The team’s STATs could generate peak pressures around 75 kPa at room temperature, which roughly equals the pressure of a FIFA regulation soccer ball or the pressure inside an Instant Pot pressure cooker. Moreover, they configured arrays of STATs, in which individual STATs in, for example, a 3×3 arrangement could be actuated in programmed patterns. The interconnected STATs were able to maintain their pressure profiles independently of the others, and under the pressure of an external weight.

“STATs overall capabilities, a fabrication path that combines tried-and-tested manufacturing techniques enabling us to design STATs with arbitrary geometries in bulk, and their water-resistance and long lifetime under stress, make them highly suitable for a wide number of applications,” said Walsh. “They could be utilized in mechanotherapeutic wearables that, by applying defined pressure patterns, could accelerate tissue repair, in responsive cushions that could help prevent pressure sores in wheelchair or hospital bed-bound individuals, or even as dynamic garments in the fashion industry, only to name a few.”

“These STAT robotic textiles emerged through a wonderful self-assembled collaboration involving multiple Wyss teams who have been able to leverage their multidisciplinary expertise to overcome a central bottleneck in robotic engineering. They have created an entirely new solution to the human-robot interface challenge, which can transform industrial robotics and change the way physical rehabilitation therapies are carried out in the future,” said the Wyss Institute’s Founding Director Donald Ingber, M.D., Ph.D., who is also the Judah Folkman Professor of Vascular Biology at Harvard Medical School and the Vascular Biology Program at Boston Children’s Hospital, as well as Professor of Bioengineering at SEAS.

The findings are published in Advanced Materials Technologies.

Subscribe to our newsletter

Related articles

Sensor for smart textiles survives hammers

Sensor for smart textiles survives hammers

An ultra-sensitive, resilient strain sensor that can be embedded in textiles and soft robotic systems survived being tested by a washing machine and a car.

Electronic skin – the next generation of wearables

Electronic skin – the next generation of wearables

Electronic skins will play a significant role in monitoring, personalized medicine, prosthetics, and robotics.

ReSkin helps to discover a sense of touch

ReSkin helps to discover a sense of touch

Carnegie Mellon University and Meta AI (formerly Facebook AI) want to increase the sense of touch in robotics, wearables, smart clothing and AI.

Glove and gaming make rehabilitation fun

Glove and gaming make rehabilitation fun

A new sensor material suitable for developing a rehabilitation glove.

‘Smart’ shirt keeps tabs on the heart

‘Smart’ shirt keeps tabs on the heart

A flexible carbon nanotube fibers can be incorporated into clothing to function as wearable health monitors.

Sensor material powers wearables in extreme cold

Sensor material powers wearables in extreme cold

A new material that combines the flexibility of human skin with improved conductivity and tolerance of temperatures as low as -93 C.

Forget wearables: smart fabrics to monitor health

Forget wearables: smart fabrics to monitor health

Engineers have developed a method to transform existing cloth items into battery-free wearables resistant to laundry. These smart clothes are powered wirelessly through a flexible, silk-based coil sewn on the textile.

Smart textiles: a programmable digital fiber

Smart textiles: a programmable digital fiber

In a first, the digital fiber contains memory, temperature sensors, and a trained neural network program for inferring physical activity.

E-textiles made with new cellulose thread

E-textiles made with new cellulose thread

Researchers have developed a thread made of conductive cellulose, which offers practical possibilities for electronic textiles.

Popular articles

Subscribe to Newsletter