Its important to use non-irritating materials in the design of wearable sensors...
It's important to use non-irritating materials in the design of wearable sensors that are used for quantifying lactate levels during exercise.

Microfluidic sensor rapidly measures lactate concentration

Lactate, a compound present in sweat, is an important biomarker to quantify during exercise. However, available wearable sensors can cause skin irritation, which calls for the use of different materials. Scientists at Tokyo University of Science have developed a soft and nonirritating microfluidic sensor for the real-time measurement of lactate concentration in sweat. This wearable device will help monitor the state of the body during intense physical exercise or work.

With the seemingly unstoppable advancement in the fields of miniaturization and materials science, all sorts of electronic devices have emerged to help us lead easier and healthier lives. Wearable sensors fall in this category, and they have received much attention lately as useful tools to monitor a person's health in real time. Many such sensors operate by quantifying biomarkers, that is, measurable indicators that reflect one's health condition. Widely used biomarkersare heartrate and body temperature, which can be monitored continuously with relative ease. On the contrary, chemical biomarkers in bodily fluids, such as blood, saliva, and sweat, are more challenging to quantify with wearable sensors.

For instance, lactate, which is produced during the breakdown of glucose in the absence of oxygen in tissues, is an important biomarker present in both blood and sweat that reflects the intensity of physical exercise done as well as the oxygenation of muscles. During exercise, muscles requiring energy can rapidly run out of oxygen and fall back to a different metabolic pathway that provides energy at the 'cost' of accumulating lactate, which causes pain and fatigue. Lactate is then released into the bloodstream and part of it is eliminated through sweat. This means that a wearable chemical sensor could measure the concentration of lactate in sweat to give a real-time picture of the intensity of exercise or the condition of muscles.

Recommended article

Although lactate-measuring wearable sensors have already been proposed, most of them are composed of materials that can cause irritation of the skin. To address this problem, a team of scientists in Japan recently carried out a study to bring us a more comfortable and practical sensor. Their work was led by Associate Professor Isao Shitanda, Mr. Masaya Mitsumoto, and Dr. Noya Loew from the Department of Pure and Applied Chemistry at the Tokyo University of Science, Japan.

The team first focused on the sensing mechanism that they would employ in the sensor. Most lactate biosensors are made by immobilizing lactate oxidase (an enzyme) and an appropriate mediator on an electrode. A chemical reaction involving lactate oxidase, the mediator, and free lactate results in the generation of a measurable current between electrodes― current that is roughly proportional to the concentration of lactate.

A tricky aspect here is how to immobilize the enzyme and mediator on an electrode. To do this, the scientists employed a method called "electron beam-induced graft polymerization," by which functional molecules were bonded to a carbon-based material that can spontaneously bind to the enzyme. The researchers then turned the material into a liquid ink that can be used to print electrodes. This last part turns out to be an important aspect for the future commercialization of the sensor, as Dr. Shitanda explains, "The fabrication of our sensor is compatible with screen printing, an excellent method for fabricating lightweight, flexible electrodes that can be scaled up for mass production."

With the sensing mechanism complete, the team then designed an appropriate system for collecting sweat and delivering it to the sensor. They achieved this with a microfluidic sweat collection system made out of polydimethylsiloxane (PDMS); it comprised multiple small inlets, an outlet, and a chamber for the sensor in between. "We decided to use PDMS because it is a soft, nonirritating material suitable for our microfluidic sweat collection system, which is to be in direct contact with the skin," comments Mr. Mitsumoto.

Recommended article

The detection limits of the sensor and its operating range for lactate concentrations was confirmed to be suitable for investigating the "lactate threshold"―the point at which aerobic (with oxygen) metabolism turns into anaerobic (without oxygen) metabolism during exercise. Real-time monitoring of this bodily phenomenon is important for several applications, as Dr. Loew remarks, "Monitoring the lactate threshold will help optimize the training of athletes and the exercise routines of rehabilitation patients and the elderly, as well as control the exertion of high-performance workers such as firefighters."

The team is already testing the implementation of this sensor in practical scenarios. With any luck, the progress made in this study will help develop the field of wearable chemical sensors, helping us to keep better track of our bodily processes and maintain better health.

The research was published in Electrochimica Acta.

Subscribe to our newsletter

Related articles

An all-in-one health monitor

An all-in-one health monitor

Engineers have developed a skin patch that can continuously track blood pressure and heart rate while measuring the wearer’s levels of glucose as well as lactate.

E-skin has a strong future stretching ahead

E-skin has a strong future stretching ahead

A material that mimics human skin in strength, stretchability and sensitivity could be used to collect biological data in real time.

Graphene – the versatile wonder material

Graphene – the versatile wonder material

Graphene has a vast variety of practical applications in the creation of new materials. But what exactly is graphene and what makes it so special?

3D printed transparent fibers can sense breath

3D printed transparent fibers can sense breath

Researchers used 3D printing techniques to make electronic fibres, each 100 times thinner than a human hair, creating sensors beyond the capabilities of conventional film-based devices.

A wearable soft sensor

A wearable soft sensor

Biocompatible sensor could be used in diagnostics, therapeutics, human-computer interfaces, and virtual reality.

Wearable biofuel cells produce electricity from lactate

Wearable biofuel cells produce electricity from lactate

Scientists have developed and tested a wearable biofuel cell array that generates electric power from the lactate in the wearer's sweat, opening doors to electronic health monitoring powered by bodily fluids.

Harvesting energy from radio waves to power wearables

Harvesting energy from radio waves to power wearables

Researchers have developed a way to harvest energy from radio waves to power wearable devices.

E-textiles made with new cellulose thread

E-textiles made with new cellulose thread

Researchers have developed a thread made of conductive cellulose, which offers practical possibilities for electronic textiles.

Ideal placement for armband to track vitals

Ideal placement for armband to track vitals

Researchers took a step forward in the development of an armband that could track the heart’s electrical activity without requiring bulky wiring or sticky gel on the skin.

Popular articles

Subscribe to Newsletter