To use the device, the finger-mounted probe is placed perpendicular to the body...
To use the device, the finger-mounted probe is placed perpendicular to the body and pressed on the tissue while OCT images are recorded. The researchers want to incorporate the sensor into a surgical glove that would preserve touch sensitivity.
Source: Rowan W. Sanderson, University of Western Australia

Optical probe could improve breast cancer removal

Researchers have developed the first wearable probe that enhances the sense of touch by imaging and quantifying the stiffness and elasticity of biological tissue. The device is being developed to improve the surgical removal of breast cancer and might also be useful for brain and liver surgery and other types of cancer.

In The Optical Society (OSA) journal Biomedical Optics Express, researchers from the University of Western Australia (UWA) describe the new device, which incorporates a fiber probe into a wearable thimble.

During breast conserving surgery, the most common surgical treatment for breast cancer, surgeons touch and compress tissue to confirm that the stiffer cancerous tissue was removed. Histopathological testing is then performed days later to ensure that the whole tumor was removed. Today, 20 to 30 percent of patients undergoing this type of surgery require another procedure because the histopathological tests show that cancerous cells remain. “Our new probe aims to enhance the surgeon’s subjective sense of touch through quantified, high-resolution imaging of tissue stiffness,” said Rowan W. Sanderson, first author of the paper. “This could make it easier to detect and remove all the cancerous tissue during the first breast conserving surgery, which would reduce the physical and psychological burden and cost that accompanies re-excision.”

The finger-mounted probe uses a technique called quantitative micro-elastography (QME) to translate the sense of touch into high-resolution images. QME uses measurements from an optical imaging technique called optical coherence tomography (OCT), which generates high-resolution, depth-resolved images of tissue structure by measuring the reflections, or ‘echoes,’ of light.

To use the device, the finger-mounted probe is pressed perpendicularly into the tissue while OCT images are recorded. “By preserving the sense of touch, we aim to conserve the existing clinical workflow and increase the likelihood that this technology would be adopted for wider clinical use,” said Sanderson.

For accurate elasticity measurements, the researchers developed new signal processing methods with custom algorithms to deal with inconsistent motion and pressure during scanning. 3D printing helped them quickly produce prototypes of the probe’s outer casing in a simple and cost-effective manner. “Our finger-mounted probe can accurately detect microscale changes in stiffness, which are indicative of disease,” said Sanderson. “The small size makes it ideal for imaging in confined spaces such as a surgical cavity.”

Tissue tests

To validate the probe, they began by testing it on materials, known as silicone phantoms, designed to mimic healthy and diseased tissues in the breast. These tests showed that the finger-mounted probe had an accuracy of 87 percent, which was slightly lower than a conventional benchtop QME system, but still sufficiently high for potential clinical use.

They then used the probe to measure the change in stiffness caused by heating a sample of kangaroo muscle. This experiment showed the muscle sample underwent a 6-fold increase in stiffness following the heating process. A preliminary 2D image was obtained by scanning the probe laterally across a silicone phantom containing a stiff inclusion. Although it showed lower accuracy than the experiment performed without scanning, the researchers say that the prospect for imaging by swiping the operator’s finger is very encouraging. “The contrast between sample features was still evident, which indicates that 2D scanning holds a lot of promise going forward,” said Sanderson.

The researchers are now working to embed the optical components of the probe into a surgical glove that would preserve the touch sensitivity and dexterity of manual palpation. They are also improving the accuracy of the 2D scanning.

Subscribe to our newsletter

Related articles

3D printing helps form wearable sensor

3D printing helps form wearable sensor

Researchers have developed a highly sensitive wearable pressure sensor for health monitoring applications and early diagnosis of diseases.

Wearable devices set to diagnose preeclampsia or epilepsy

Wearable devices set to diagnose preeclampsia or epilepsy

Transforming how common health conditions are diagnosed using point-of-care and wearable bio diagnostic devices is the goal of a new University of South Australia project.

Diabetes: 3D printed sensors for breath tests

Diabetes: 3D printed sensors for breath tests

Researchers have developed a procedure to produce extremely sensitive and energy-efficient sensors using 3D printing.

Wearable strain sensor uses light for monitoring

Wearable strain sensor uses light for monitoring

Researchers have developed a novel wearable strain sensor based on the modulation of optical transmittance of a carbon nanotube (CNT)-embedded elastomer.

3D printed sensor invented for wearables

3D printed sensor invented for wearables

Researchers have utilized 3D printing and nanotechnology to create a durable, flexible sensor for wearable devices to monitor everything from vital signs to athletic performance.

Sensor predicts worsening heart failure before hospitalization

Sensor predicts worsening heart failure before hospitalization

A wearable sensor could help doctors remotely detect critical changes in heart failure patients days before a health crisis occurs and could prevent hospitalization.

Wearable sensor to help treat swallowing disorders

Wearable sensor to help treat swallowing disorders

A wearable monitoring device to make treatments easier and more affordable for the millions of people with swallowing disorders is about to be released into the market.

Wearable sweat sensor detects Gout-causing compounds

Wearable sweat sensor detects Gout-causing compounds

Researchers describe a mass-producible wearable sensor that can monitor levels of metabolites and nutrients in a person's blood by analyzing their sweat.

Can ‘smart toilets’ be the next

Can ‘smart toilets’ be the next

Wearables are transforming the ability to monitor and improve health, but a decidedly low-tech commodity—the humble toilet—may have potential to outperform them all.

Popular articles