Wearable antennae stretches boundaries of medical tech

Researchers from Pennsylvania State University led two international collaborations to prototype a wireless, wearable transmitter while also improving the transmitter design process.

Photo
The wearable transmitter is designed to compress its top layer in a double arch pattern, shown here, to respond to movement without compromising signal transmission
Source: Image provided by Huanyu Cheng

Current research on flexible electronics is paving the way for wireless sensors that can be worn on the body and collect a variety of medical data. But where do the data go? Without a similar flexible transmitting device, these sensors would require wired connections to transmit health data.

Huanyu "Larry" Cheng, Dorothy Quiggle Career Development Assistant Professor of Engineering Science and Mechanics in the Penn State College of Engineering, and two international teams of researchers are developing devices to explore the possibilities of wearable, flexible antennae. They published two papers in April in Nano-Micro Letters and Materials & Design.

Wearable antenna bends, compresses without compromising function

Like wearable sensors, a wearable transmitter needs to be safe for use on human skin, functional at room temperature and able to withstand twisting, compression and stretching. The flexibility of the transmitter, though, poses a unique challenge: When antennae are compressed or stretched, their resonance frequency (RF) changes and they transmit radio signals at wavelengths that may not match those of the antenna's intended receivers.

"Changing the geometry of an antenna will change its performance," Cheng said. "We wanted to target a geometric structure that would allow for movement while leaving the transmitting frequency unchanged."

The research team created the flexible transmitter in layers. Building upon previous research, they fabricated a copper mesh with a pattern of overlapping, wavy lines. This mesh makes up the bottom layer, which touches the skin, and the top layer, which serves as the radiating element in the antenna. The top layer creates a double arch when compressed and stretches when pulled - and moves between these stages in an ordered set of steps. The structured process through which the antenna mesh arches, flattens and stretches improves the overall flexibility of the layer and reduces RF fluctuations between the antenna's states, according to Cheng.

Energy efficiency was another priority. The bottom mesh layer keeps radio signals from interacting with the skin. This implementation, beyond preventing tissue damage, avoids a loss of energy caused by tissue degrading the signal. The antenna's ability to maintain a steady RF also allows the transmitter to collect energy from radio waves, Cheng said, potentially lowering energy consumption from outside sources.

The transmitter, which can send wireless data at a range of nearly 300 feet, can easily integrate a number of computer chips or sensors, Cheng said. With further research, it could have applications in health monitoring and clinical treatments, as well as energy generation and storage.

"We've demonstrated robust wireless communication in a stretchable transmitter," Cheng said. "To our knowledge, this is the first wearable antenna that exhibits almost completely unchanged resonance frequency over a relatively large range of stretching."

Enabling further antenna customization with constant variables

Photo
The research is paving the way for wireless, wearable health monitoring devices that can collect and transfer information.
Source: Image provided by Huanyu Cheng

After developing the stretchable antenna prototype, Cheng analyzed it with another research team. The researchers aimed to identify new fundamental pathways for fine-tuning such a device that could be applied to similar, future research. "We wanted to investigate the problem by examining the connection between mechanical properties and electromagnetic behavior," Cheng said. "Highlighting this relationship can reveal insights about the influence of different parameters on antenna performance."

The team fabricated an antenna with layers and a mesh pattern similar to their previous prototype but lacking the double-arch compression structure. They measured the deformation of the antenna as the mesh was stretched at different intervals, then used computer simulations to examine the relationship between the deformation and the antenna performance.

To simplify the analysis of the antenna's radio signal transmission, the researchers used a mathematical technique to convert certain measurements -- such as the width and angle of the repeating mesh pattern -- into constant values. With this process, called normalization, researchers can focus on the relationship between specific variables by negating the influence of the normalized variables.

The team found that the normalization of different variables provided several avenues for customizing the antenna's performance. They also found that the simulated geometry of the mesh could produce different outcomes, even with the same set of normalized variables.

Though the researchers analyzed wearable antenna properties, Cheng emphasized that their methods could be applied to other radio frequency devices. "We've shown that you don't have to be limited to exploring the effects of one normalized variable," Cheng said. "Using this method, we can tailor the properties for other antennae or devices that communicate using microwaves."

Looking toward the future

Cheng and his collaborators will continue to research ways to facilitate the development of these devices through application-based studies as well as further fundamental explorations to optimize the design process.

"We are really excited that this research could one day lead to networks of sensors and transmitters worn on the body, all communicating with each other and external devices," Cheng said. "What we're imagining is science fiction at the moment, but we are working to make it happen."

Subscribe to our newsletter

Related articles

The world’s smallest wearable device

The world’s smallest wearable device

The wafer-thin, feather-light sensor can fit on a fingernail and precisely measures a person’s exposure to UV light from the sun.

Hybrid materials advance wearable devices

Hybrid materials advance wearable devices

We spoke to wearables and medical device expert Professor John Rogers about the benefits, challenges, trends and innovation within the sector.

A new medical device for monitoring vital signs

A new medical device for monitoring vital signs

A new device consisting of a 3D-printed wristband can remotely monitor patients' vital signs, such as body temperature, oxygen saturation, pulse, and respiratory rate.

Wearable monitors jaundice-causing bilirubin in newborns

Wearable monitors jaundice-causing bilirubin in newborns

Researchers have developed the first wearable devices to precisely monitor jaundice, a yellowing of the skin caused by elevated bilirubin levels in the blood that can cause severe medical conditions in newborns.

Wearable shines light on benefits of outdoor lighting

Wearable shines light on benefits of outdoor lighting

A device could help scientists better understand the health benefits of outdoor lighting and lead to wearables that could nudge users to get more outdoor time.

Micro-supercapacitors to self-power wearables

Micro-supercapacitors to self-power wearables

A stretchable system that can harvest energy from human breathing and motion for use in wearable health-monitoring devices may be possible.

Graphene – the versatile wonder material

Graphene – the versatile wonder material

Graphene has a vast variety of practical applications in the creation of new materials. But what exactly is graphene and what makes it so special?

Step closer to high-performing wearable

Step closer to high-performing wearable

The University of Surrey has unveiled a device with unique functionality that could signal the dawn of a new design philosophy for electronics, including next-generation wearables and eco-disposable sensors.

Wearable sensor helps ALS patients communicate

Wearable sensor helps ALS patients communicate

Researchers have designed a skin-like device that can measure small facial movements in patients who have lost the ability to speak.

Popular articles

Subscribe to Newsletter